Welcome!    Date:

Climatic chamber+Dynamometer

Tests:

Emission capacity test

Defrosting and defogging tests, meeting the requirements of GB11555-2009、SAE J381-2009.

Performance test of cold start , meeting the requirements of GB T 12535-2007

Heat insulation and ventilation test, meeting the requirements of GB 12546-2007

Heat damage test, meeting the requirements of GB/T 12542-2009

Performance test of air conditioner system, meeting the requirements of GB/T 12782-2007

Emission test equipment

Gasoline/diesel vehicle conventional pollutants measurement system

Capacities

These test equipments adopt advanced FTIR Fourier infra-red technology, which can continuously measure the concentration of over 10 types unconventional poisonous pollution in vehicle exhausted gas, including NO2、N2O、SO2、HCHO、HCOOH、C2H4、C2H6、C3H6,etc. and can be used for assessing emission situation of the unconventional poisonous pollution with flexible fuel,including biological fuel/alcohol fuel/ether fuel/LPG/CNG, etc.。

Counting system of solid particle MEXA-1000SPCS

Supplier:HORIBA

Size of particle counting::23nm~2.5μm

Range of particle counting:0-10000pc/cm3 ~0-50000pc/cm3

Walk-in Climatic chamber

Tests

Defrosting and defogging tests, meeting the requirements of GB11555-2009、SAE J381-2009.

Performance test of cold start , meeting the requirements of GB T 12535-2007

Walk-in climatic chamber

Tests

Defrosting and defogging tests, meeting the requirements of GB11555-2009、SAE J381-2009.

Performance test of cold start , meeting the requirements of GB T 12535-2007.

Four two cover fatigue endurance test

Equipment functions:

Meeting the requirements of QC/T 476-2007, this lab can simulate the sunlight with different intensity and directions, and adjust the relative distance between light source and test sample to meet the test requirement to

different volume. This lab also match the test conditions

of M, N, O type vehicles.

Climatic chamber+Altitude simulation

specifications of equipments

Climatic emission lab simulating high altitude(5000m)

Performance test for new energy vehicle(hybrid vehicle, pure electric vehicle)

Performance test in high and low temperature(-40℃~60℃)

Full Spectrum sunshine simulation and air conditioning calibration

Ultra-low emissions(SULEV,EU5/6)

Component Climatic chamber

Tests

this lab can do various tests to the vehicle components, including high and low temperature tests, humidity test, light resistance test, salt fog corrosion resistance test;

ozone resistance test to rubber and other non-metal components.